Novice Step-by-step Guide to Installing a New Shower Unit

Book A Free Estimate

We've unearthed this post on How to Build a Shower Enclosure for Your DIY Bathroom directly below on the web and think it made perfect sense to relate it with you over here.


How to Install a Shower Enclosure
A successful shower installment calls for cautious planning and a great deal of job. Most of the times, you will certainly need to do 3 kinds of tasks: mounting walls, installing the plumbing, and also ending up walls.

Prep work


To start with, you need to decide on the sort of shower that you wish to set up. It is essential to identify whether the chosen shower can dealing with specific systems and can control a secure degree of water via the boiler. Many shower systems nowadays are made to be flexible to different water pressures (such as kept warm water as well as cold mains).
It is additionally crucial to think about the water pressure and also the preparation of the piping and also drain for the shower

Various Sorts Of Shower Units


  • Push-on Mixer: The pipe and spray parts of the push-on mixer shower unit can be linked to the bathroom tap as per your requirement, and the water temperature level can be readjusted by means of the taps. Push-on mixers are cheap and also very simple to install. Nonetheless, although the pipe connection is straightforward, it is easily removed. Additionally, it is bothersome to change the temperature.

  • Bath/Shower Mixer: The hose pipe and also spray of this kind of shower are incorporated with a bath mixer faucet, and the temperature level can be adjusted with the bathroom faucets. It is a very inexpensive choice and also no extra plumbing is included. Nonetheless, the bath/shower mixers additionally deal with inconvenient temperature control choices.

  • Handbook Mixer: The tube and also spray of a manual mixer shower unit are a part of the wall surface system as well as the cold and hot water products are attached to a solitary shutoff The temperature level and also stress of the water are managed via either one or a selection of knobs (in a lot more pricey showers). Although temperature level control is much easier in manual mixer kinds, they are a lot more expensive than the formerly pointed out mixers. They also call for additional plumbing of cold and hot supply of water pipelines.

  • Thermostatic Mixer: The hose pipe and also spray of this shower type belong of the wall system and also the hot and cold water products are connected to a single shutoff here too. It is total with an integrated stabiliser to self-adjust the water temperature and also to prevent it from ending up being also warm. Among the most significant advantages of a thermostatic mixer shower kind consists of convenient temperature level control. Nonetheless, it is one of the most pricey of the various mixer alternatives.

  • Power Shower: A power shower is a solitary device having an effective electric pump that is capable of altering both the water stress and also temperature level. This kind of shower can be fitted if there is water system from a cold water cistern and also a warm water cyndrical tube. A power shower makes the change of both stress as well as temperature level simple. On the other hand, it disagrees for water heated up directly by the shower or where the water is supplied by a mix central heating boiler under keys stress.

  • Electric Shower: An electric shower is plumbed right into a mains cold water supply and also it heats up the water electrically. It is essential to keep in mind that for this shower type to be mounted, the mains stress requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The unit permits the temperature level and pressure to be readjusted via a knob. Versions with temperature stabilisers are better as they stay untouched by various other taps elsewhere being used within the family. A significant downside of electric showers is that the control knob only allows for the choice of high temperatures at less pressure, or lower temperatures at a greater pressure. This is problematic in the winter season when the spray is commonly weak and also the mains water is chillier. Nevertheless, this issue is tackled in some models which are readily available with a winter/summer setting.

  • Method


    Relying on the kind of shower you wish to install, the shower head should either be suited order to prevent its contact with the water in the bathroom listed below or the base tray, or it should have a check valve.
    Prior to beginning, it is recommended to mark the positions of the shower head and control, as well as to prepare the pipe-work involved. In addition, the drain system to get rid of the waste water will certainly need to be prepared. Both placements of the cable television course and the shower button will certainly also need to be taken into consideration if an immediate or electrical shower device is being installed.
    Use the direction overview given with the shower unit to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is essential to cut off the water system. In order to secure the pipelines, they must be provided a water-proof covering as well as likewise fitted with isolating shutoffs. The pipelines can after that be buried into the wall and glued over to neaten the total appearance.
    Fit the base tray, shower head, and also installations.
    Link the main shower control to the pipes that will certainly be supplying the water (This might need a female screw string adapter).
    Reconnect the water as well as test the pipelines for any kind of leaks, as some might require tightening.
    If you are setting up an electrical shower, bear in mind to turn off the power supply before making any electric links. When these connections have actually been made (there ought to be assistance within the user's manual), the power supply can be switched back on.

    Adjusting Water Stress to Suit Your Shower


    The cold water storage tank can be raised to a better elevation (sometimes as little as 150mm (6inches)) by installation a solid wood support under it - potentially made up of struts as well as blockboards. If you pick this option, the primary and also distribution pipes will certainly additionally need to be elevated to satisfy the new height of the reservoir.
    Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is selected, it has to be linked right into the power supply in order to run.

    Piping and Drainage


    It is best to use 15mm diameter supply pipes, and make the go to the shower as short as well as straight as possible so as to maintain maximum stress and minimise heat loss. In addition, by minimising using arm joints for pipe edges, you can reduce the resistance in the circulation of the water system. You can accomplish this by flexing the pipes rather.

    Most Typical Blunders


  • Breaching or overlooking local code limitations.

  • Making use of pipes that are as well little.

  • Affixing copper to galvanized without using a brass or dielectric fitting between the two.

  • Not using tape or pipe compound at threaded joints.

  • Not leveling your components when mounting them.

  • Not setting up an air space filling up for fixtures.

  • Cutting supply stub outs too short to install the shutoff valves onto after the finished wall remains in area.

  • Not effectively aligning tubing into installations or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will certainly trigger a leak.).

  • When transforming the water back on in your house, always run the outdoors hose pipe valve or purge your bathrooms to hemorrhage dirt and air from the lines. This particles can create troubles in your sink faucets and various other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.


    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.


    Are you confused?


    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.


    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.


    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.


    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.


    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.


    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Install a Shower Enclosure

    Do you appreciate reading up on Simple ways to Install a Shower Cubicle on Your Own? Give a comment directly below. We will be delighted to know your insights about this blog. We are looking forward that you come back again in the future. Sharing is nice. You just don't know, you may very well be helping someone out. I truly appreciate reading our article about How to Install a Shower Enclosure .


    Need Help? Hire Us Now!

    Leave a Reply

    Your email address will not be published. Required fields are marked *